Morbella MX6, User Manual

Page: 22 / 22

Page 22
© 2013 Maka Technologies Group. All Rights Reserved.
Question Reason Solution
The captured image is
not stored 1. MicroSD card might be
full.
2. Image is not saved
before the power
outage.
Make sure to stop recording before
shutting down.
All buttons are invalid Procedural error or faulty
operation Press RESET button to restart the
DVR.
Device cannot be turn
on Device might be low in
battery. Charge the Battery.
Screen Auto power-off 1. Screen Saver function
is enabled.
2. Low Battery.
1. Click on [M] twice to the setup
page and change [Screen Saver]
to off.
2. Charge the battery
Unable to take pictures
or record videos MicroSD card might be full.
Check your microSD card’s memory
space. Delete files if required.
Auto stop recording in
video mode Use a compatible SDHC
microSD card for HD video
recording. Get a microSD card that has
minimum of Class 10 speed.
Encounter “file error”
when trying to
playback pictures or
videos MicroSD card might be
corrupted. There bad
sectors in the card. Reformat the microSD card.
No image is displayed
on a high-definition TV
screen 1. Cable plug might not be
plugged in properly.
2. Wrong TV Input mode
1. Ensure AV/ HDMI cable is plug
into the TV properly.
2. Refer to the back panel of your
TV to track the correct TV input.
Make sure you have selected
the correct input.
Hazy Images Lens might be dirty. Check if there are fingerprints or
dust on the lens. Clean it with a
micro fabric cloth if necessary.
Supply light cannot be
turn on Device might be low in
battery. Supply light will
not be able to on when
power is insufficient. Charge the Battery.
There are horizontal
stripes interference on
the image This could be due to wrong
light frequency setting. Please set according to the local
power supply respectively; 50Hz or
60Hz. For SG/MY: 50hz