11
ENGLISH
5. GENERAL DESCRIPTION
Sling for all kind of patient lift. Made in polyester (100%), especially suitable for water contact,
strong and breathable, sewn with polyester thread. The border is made by a strong ribbon (100%
nylon), which make three eyelets in every extremity to guarantee a perfect balance. The belt
continuos and swen around the entire perimeter of the sling to ensure greater toughness. The
seams are made using high strength polyester yarn.
The RP888 model has the headrest reinforced to increase the head support making the transfer
more confortable.
1.
Upper eyelet
2.
Loops
3.
Intermediate eyelet
4.
Loops
5.
Movement handle
6.
Label
7.
Movement handle
8.
Lower eyelet
9.
Loops
REF. RP888
1
2
3
4
5
6
6. BEFORE USE
Always verify the sling is in perfect condition, carefully check the seams and the loops.
7. USING WARNING
- Before use, make sure the device is not damaged: the tissue, the border, the sewing and
suspension loops must be intact
- Periodically check for any damage or usury, every 6 month at least, in particular if you often
clean the sling
- Ensure the loops are correctly hooked to the cradle
- Store and use away from flame or source of heat
- Do not exceed the maximum load
REF. RP881
1.
Upper eyelet
2. Movement handle
3. Label
4. Lower eyelet
5. Loops
6. Reinforced headrest
