K6859438
07/22/2005
Page 2 of 9
A – Interior Trim Panel and Component Removal
1) Position shift lever to neutral (N) and engage the
parking brake.
2) Open the trunk/liftgate, raise up carpet liner and
locate vehicle battery at the right quarter panel.
3) Disconnect and isolate negative battery cable.
4) Remove center console bezel using a non-metal
trim stick. Unplug all connectors.
5) Remove the radio (four phillips screws).
9) Open the floor console bin lid.
10) Remove and discard bin mat.
11) Remove and discard bin lid. Save two phillips
screws for re-use.
12) Remove 3-4 screws from bin floor (8mm wrench).
Save for re-use.
NOTE: Vehicles built before January 2005 will have
3 screws, vehicles built after will have 4
screws.
6) Remove center console rubber mat.
7) Remove ash tray/switch panel. Unplug all
connectors.
8) Remove two floor console mounting screws. Save
for re-use.
Center
Console
Bezel
Radio
300 Shown, Magnum and Charger Similar
Rubber
Mat
Ash Tray/
Switch
Panel
Bin Lid
Bin Floor
Bin Mat
