background image

 
        Manual Part No: 932004-01 

                   MD Gas Steamer 

  

 - 13 – 

        Manual Rev No

2

 

 

USERS INSTRUCTIONS

 
Important Note! 
 
The attention of the user is drawn to the requirements of the 

GAS SAFETY (INSTALLATION & USE

REGULATIONS 2000

. This appliance 

MUST

 be used in accordance with those, particularly so in respect 

of the need for regular servicing.  
 
The attention of the user is also drawn to the requirement that those parts, which have been protected 
by the manufacturer or his agent, are not to be adjusted by the user. 
 
See also the sections of this manual referring to Cleaning and General Maintenance. 
 
Safety Note: 
 

This appliance is intended for professional use and shall only be used by qualified personnel. 

 
Parts and surfaces of this appliance get hot in use. It is the responsibility of the kitchen supervisor to 
inform and warn every user and kitchen worker of this and, furthermore, to ensure those users wear and 
use protective clothing when operating the appliance. 
 
Should any adjustment or attention be necessary, you are advised to contact your nearest 

CORGI 

(Confederation for the Registration of Gas Installers) Service Engineer immediately. The need for regular 
servicing is detailed in the 

GAS SAFETY (INSTALLATION & USE) REGULATIONS 2000. 

 

IF YOU THINK THAT GAS IS ESCAPING, ACT IMMEDIATELY. SHUT OFF THE GAS SUPPLY AT THE 
METER OR EMERGENCY CONTROL, CONTACT THE SUPPLIER OF YOUR GAS IMMEDIATELY. 

 

MAKE SURE THAT ALL USERS OF THIS APPLIANCE KNOW WHERE THE GAS SUPPLY STOPCOCK IS 
LOCATED FOR THE USE IN AN EMERGENCY. 

 
Improvements 
 
The policy of Viscount Catering Ltd is such that each product is subject to continual improvement. The 
company reserves the right to alter the design of any appliance without prior notification and 
without the responsibility to update any delivered or in-service appliance and furthermore, without 
incurring the responsibility for altering these instructions. In such circumstances, it may be found that 
the appliance detailed herein differs in certain respect from the one supplied. 
 
For further details or enquires please contact: 
 
Viscount Catering Limited, Provincial Park, Nether Lane, Ecclesfield, Sheffield, S35 9ZX 
 
Tel: +44 (0) 114 2570100 
Fax: +44 (0) 114 2570251 
 

Summary of Contents for ML60S-HP-D2S

























Reviews: