Installation (cont.)
Floor Stand
Secure cross brace (C) to LH leg structure (A) and RH leg structure (B) using the 6mm round head screws,
washers, spring washers and nuts provided.
Stand the partly assembled structure on its adjustable feet and fit the shelf (D) using the 6mm round
head screws, washers and nuts provided and secure the front of the shelf through the side flange with
the two 6mm round head screws provided.
Finally tighten all the screws and nuts and lift the grill onto the stand and secure with the four 5mm
screws provided into the base of the grill.
Adjust the levelling feet so that the stand sits firmly and level.
Manual Part No: 930154-01
MD Electric Grill
- 12 –
Manual Rev No: 1
