www.moorecoinc.com | 800.749.2258
Page 9 of 23
800.749.2258 | www.moorecoinc.com
Wired Boards Only
6. Plug the USB cable into your OneBoard and connect the other end to your PC.
7. The OneBoard has been detected and is ready to use when your computer displays the
following dialog:
8. Once your board is connected for the first time, you will need to calibrate the software
using the directions on page 12.
Wireless Boards Only
6. Plug the included power adapter into the wall and connect the USB cable to the
OneBoard.
7. Plug the OneBoard USB wireless receiver into your PC.
8. If this is your first time using the USB wireless receiver or using it with this OneBoard, you
will need to wait for Windows to install the drivers and then open the Wireless Settings
screen. You can find the Wireless Settings screen by right-clicking the driver icon in the
notification area and choosing “Wireless Settings”.
9. When you first open the Wireless Settings, it will scan for your OneBoard. Once your
OneBoard has been located, use the “Pair” button to connect your computer and your
OneBoard. Under normal circumstances, you will only need to pair your computer and your
OneBoard the very first time you use them together. The connection will be automatic from
then on, given that steps 6 and 7 have been followed.
10. Once your board is connected for the first time, you will need to calibrate the software
using the directions on page 12.
