The Interface Solution Experts
33
THZ
2
&
TDZ
2
Programmable Smart HART
Temperature Transmitter and Display
Equipment Ratings
The THZ
2
and TDZ
2
do not generate hazardous volt-
ages, rather, they accommodate a temperature input,
and generate a low voltage current output. Products
connected to the THZ
2
or TDZ
2
should be designed to
receive these inputs.
Supply Wiring
All power connections should be made with the proper
wire.
The end of each conductor should be stripped no
more than 8mm (0.31 in). The end of the stripped wire
should be tinned with solder, or inserted into a ferrule
and crimped before being placed into a terminal block.
Conductors connected to screw-type connections
should have a ring-lug or spade-lug crimped onto the
wire end.
CE Conformity
Installation of any Moore Industries’ products that
carry the CE marking must adhere to the guidelines in
the Recommended Ground Wiring Practices section in
order to meet the EN 61326 requirements set forth in
the applicable EMC directive.
