www.miinet.com
Moore Industries-International, Inc.
- 21 -
User’s Manual
238-760-00K
May 2019
Functional Safety Dual Input Smart HART® Temperature Transmitter
STZ
Figure 2.8.
Verify your sensor type
Use PACTware to verify how your instrument is configured. Refer to Figure 2.8 below.
Check the Configure Sensors settings in PACTware. This will help you to be sure to apply the
correct input with which to trim your STZ. By example: If the Sensor 1 Input is “3W RTD” and
the Type is “Pt3850-1000” and Engineering Units is “degrees Celsius” then you should be using
an accurate resistance source (such as a decade box) to emulate the 3-wire, Pt 3850, 1000Ω
RTD and use the Celsius temperature tables to source the correct resistances for your specific
temperature range.
SECTION 2
