Moomba Gravity Edition, Owner'S Manual

Page: 35 / 88

35
© 2009 Skier’s Choice, Inc.
Out of Range Display
If the display indicates three horizontal bars as shown, the depth
sounder indicates an out of range, inaccurate or incomplete
data condition.
An out of range condition occurs when the depth reading is
less than 2.5 feet (3.0 Meters) or greater than 200 feet (60.9
Meters).
Inaccurate or incomplete data will cause an out of range
condition when operating in extremely dirty water, very soft
bottom or at high speeds. A faulty or improper transducer
connection can also cause an out of range error condition.
TROUBLESHOOTIING
Instrument Does Not Turn On
If applicable, check main power supply fuse to the unit. If
it is blown, replace it with a 1 amp, normal blow fuse. If in-
line fuse is used, clean all corrosion from the fuse housing
or replace the fuse holder assembly if necessary.
Instrument Does Not Turn On (continued)
Check the power cable connection. Be sure that the unit is
connected to a known power source:
RED wire to positive, BLACK wire to negative or ground.
Ensure that the power source is powered using a test light
or some other reliable form of testing 12 volt power.
If you are sure that the unit is receiving power and is still
not functioning, please contact Customer Service for
assistance.
Random or Flashing Bottom Reading
Under certain circumstances, the depth sounder may not
perform at the best of its ability. Extremely dirty water, very
soft bottom, high speeds, deep water, or a combination of
the above will result in incomplete or inaccurate readings.
Check the transducer cable connection on the back of the
unit.
Contact Customer Service for assistance if you are unable
to correct the problem.
•
•
•
•
•
•
•
•