1. Press the button to change the cleaner
’
s cleaning state to standby.
2. When the cleaner is standby, press the button to let it shift to auto cleaning mode. After
finishing the sweeping will turns into recharging mode.
3. The cleaner will respond with a sound when receiving an order from the remote control.
1. Press the button to change the cleaner
’
s cleaning state to standby.
2. When the cleaner is standby, press the button to let it shift to edge cleaning mode.
After finishing the sweeping task it automatically turns into recharging mode.
3. The cleaner will respond with a sound when receiving an order from the remote control.
1. Press the button to change the cleaner
’
s cleaning state to standby.
2. When the cleaner is standby, press the button to let it shift to single-room cleaning
mode. After finishing the sweeping task it automatically turns into recharging mode.
3. The cleaner will respond with a sound when receiving an order from the remote control.
1. In the standby state pressing this button, the
“
”
and
“
”
on the display screen
will flash. Then press the up/down key to adjust the hour.
2. Press the left/right-turn key
“
”
and
“
”
to change into
“
”
to adjust the
minute.
3. Please save your settings by pressing the
“
”
or
“
”
key. The cleaner will
respond with a sound when receiving an order from the remote control.
1. In the standby state pressing this button, the
“
”
and
“
”
on the display
screen will flash. Then press the up/down key to adjust the hour.
2. Press the left/right-turn key
“
”
and
“
”
to change into
“
”
to adjust the
minute.
3. Please save your settings by pressing the
“
”
or
“
”
. The cleaner will respond
with a sound when receiving an order from the remote control.
1. In the cleaning mode, press the button to change the vacuum cleaner into standby.
2. In the standby mode, press the button to let it do in recharging mode. The cleaner will
respond with a sound when receiving an order from the remote control.
Auto Cleaning button
Edge Cleaning button
Single Room Cleaning
button
Button of time-setting
Button of scheduling
to clean
Button of recharging
Function Guidelines
Function Information
Steps of resetting the remote control:
A. Keep the cleaner in the standby mode;
B. Press the
“
power
”
button of the cleaner;
C. Waiting for 6s the machine will start to reset its code. The power indicator will flash.
D. Press the
“
”
button, release the key. When listened the
“
didi
”
sound.The pairing
code process is finished.
Remarks:
if do not listen the
“
didi
”
sound, it means the pair-code operation is failed. Please repeat the above
procedures.
Note:
If the remote control fails to respond, please check whether its battery power
is too low. If you still can't operate the cleaner after charge,then re-pair again.