Tips:
1. Customers should operate the cleaner within 7 meters distance covered by WIFI signal with our
remote control; otherwise, the operation fails.
2. When press the
“
auto-recharge
”
button, the vacuum cleaner will may fail to return to the charging
base either because of complex surrounding obstacles or running-out-of batteries.
Single Room Cleaning
Start/Stop Auto cleaning
Right-turn button
Back button
Auto cleaning button
Left-turn button
Forward button
Auto charging
Set the current time
Button of scheduling to clean
Edge cleaning button
4.3 Use of Remote Control
Function Guidelines
1. When the cleaner is in standby mode, press the button to enter the auto-cleaning mode.
2. When the cleaner is at any cleaning mode, press the button to let it shift to standby
mode. After finishing the sweeping task it automatically turns into recharging mode.
3. When setting the time, press this button to hold settings.
4. The cleaner will respond with a sound when receiving an order from the remote control.
Long-press the button and the cleaner will forward; releasing, it stops moving.
Long-press the button and the cleaner rotates counterclockwise; releasing, it stops.
Long-press the button and the cleaner rotates clockwise; releasing, it stops rotating.
Long-press the button and the cleaner moves backward; releasing, it stops moving.
Function Information
Introduction of remote control buttons