10
3) INSTALLING THE ELECTRONICS
A)
Carefully remove the Printed Circuit Board from the protective sleeve.
Take the washer you prepared in the previous step and slide it onto the
audio output jack, lining up the missing section with the metal tab on
the jack.
B)
Place the Printed Circuit Board into the Bottom Chassis. Slide the audio
jack through the jack hole, and be sure the five mounting holes in the
Printed Circuit Board line up with the standoffs on the Bottom Chassis.
Using the silver pan head machine screws (x5), loosely attach the Printed
Circuit Board to the chassis. Take a moment to make sure everything is
lined up neatly and correctly—including the power input jack—and then
go ahead and tighten the screws.
Finally, place the black nylon hex nut on the audio jack, and hand-tighten
the nut to hold the jack securely to the Bottom Chassis.
A.
B.
