11.6 Error list
11.6.1 Error 0: Unknown error
No Error.
An error message with the error number 0 usually
does not occur.(inverse error number)
11.6.2 Error 1: Runtime error
11.6.2.1 Error 1-0 (emergency code 6010h)
Cause: Unknown runtime error
Suggested steps:
See exception message
This is probably a software
issue.
l
Please try to switch to a different version of
device firmware.
l
Save your dataset and reset the axis module to
factory setting. See if the error persists, or if it
comes with activating a certain feature.
MOOG
ID No.: CB40859-001 Date: 11/2020
MSD Servo Drive - Device Help
328
11 Alarms & warnings
11.6.2.2 Error 1-1 (emergency code 6010h)
Cause: Error while installing a dynamic module
Suggested steps:
This is probably a software
issue.
l
Please try to switch to a different version of
device firmware.
l
Save your dataset and reset the axis module to
factory setting. See if the error persists, or if it
comes with activating a certain feature.
11.6.2.3 Error 1-2 (emergency code 6010h)
Cause: Error while flash initialisation / flash access
Suggested steps:
This is probably a software
issue.
l
Please try to switch to a different version of
device firmware.
l
Save your dataset and reset the axis module to
factory setting. See if the error persists, or if it
comes with activating a certain feature.
