MP-201 Multi-Pedal Manual
Firmware v2.0 Addendum
A tour of the new UTILITIES menu:
Numbers in brackets [ ] denote top-level Utilities menu items; numbers in parentheses () denote choices within a
given Utilities selection. The numbers indicate the order of the items within the menus and sub-menus.
[0]
VERSION NUMBER:
No options here; shows the current firmware release version and build number.
[1] QUAD OPTIONS:
New options pertaining to the
QUAD
mode of operation.
(1) DEFAULT MODE
- Sets which Performance Mode to use on power-on;
SINGLE
or
QUAD
.
(2) QUAD MONO/POLY
- Selects how channel On/Off foot switches behave in Quad Mode.
MONO
=
only one channel on at a time. QUAD MONO mode is great for controlling multiple effects on a guitar
pedal board, switching instantly from one EXPRESSION channel to another.
(3) QUAD DISPLAY
–
CHANNEL MODES
or
CHANNEL NAMES
.
Select which you want to show on LCD in Quad Mode (if Display Units turned
OFF
).
[2] MIDI SETUP:
(1) MIDI IN
- Select
DIN
only,
USB
only, or both
DIN
and
USB
.
(2) MIDI OUT
- Select
DIN
only,
USB
only, or both
DIN
and
USB
.
(3) MERGE USB IN
- Merge to
NONE
,
DIN
Out,
USB
Out,
DIN
and
USB
Out.
(4) MERGE DIN IN
- Merge to
NONE
,
DIN
Out,
USB
Out,
DIN
and
USB
Out.
(5) BASE CHANNEL
-
OFF
,
1-16
,
ALL
. Unit will only respond to Program Change and Channel Toggle
CC messages on the selected Base Channel.
(6) PGM CHANGE Tx/Rx
- Control sending and receiving MIDI Program Change messages:
Send &
Receive
,
Receive Only
,
Send Only
, or
OFF
.
(7) MULTI PGM CHANGE
- "
Send All At Once
" sends Program Change messages for all channels of
an MP-201 preset at once, and only sends them when the preset is first loaded. "
Send Per Channel
"
sends each MP-201 channel's Program Change message any time that channel is toggled from Off to
On. In "
Per Channel
" mode, when a preset is first loaded, channels whose InitialState is On send a
Program Change.
(8) CC CHAN TOGGLE
- Midi CC numbers
111
,
112
,
113
,
114
, if received on the MIDI Base Channel,
can toggle MP-201 channels On and Off.
This option sets
Momentary
or
Latching
On/Off behavior in response to these CC messages.
(9) MIDI GOVERNOR
: Slows down the rate of MIDI data output from the MP-201.
Higher numbers mean slower MIDI output.
[3] CV SCALE:
Set the voltage range of the CV outputs.
UNIPOLAR
= 0V to +5V,
BIPOLAR
= -5V to +5V.
[4] CV SMOOTH:
ON
or
OFF
.
If
ON
, a fixed analog filter is applied to all CV output, to smooth out changes in voltage.
Now that adjustable
CV LAG
has been added in firmware v2.0,
you may wish to leave
CV SMOOTH
turned
OFF
.
[5] DISPLAY UNITS:
Options are
OFF
,
VOLTS
,
MIDI
, or
PRECISION
.
Changes how edited values are displayed on the LCD.
OFF
is recommended.
Page | 7
Specifications subject to change without notice
moogmusic.com
