manualshive.com logo in svg

Moog Little Phatty, User Manual

Share
Download
Moog Little Phatty User Manual Download Page 33

Page 34 

  

 

 

 

 

 

 

 

 

 

LP User’s Manual - The User Interface 

   

 

 

 

 

 

 

 

 

Page 35

 

LP User’s Manual - The User Interface

D. System Utilities menus

System Utilities provides a set of useful commands, including a command to send an “All Notes Off ’ mes-
sage, a command to perform an operating system reboot, and a command to restore factory default values 
and presets. 

ALL NOTES OFF:

The fi rst System Utilities option is ‘ALL NOTES OFF’.  This command 
issues an ‘All Notes Off ’ message to the MIDI Output, shutting off all 
active notes and controllers.  This command is the equivalent of a ‘panic 
button’ used to silence stuck notes or errant controllers.  To issue this 
command, simply press the 

ENTER

 button.  You do not have to enable 

the menu using the 

CURSOR

 button. 

The LCD will briefl y display an ’ALL NOTES OFF’ message while the 
data command is transmitted.  When complete, the screen will return 
to the System Utilities menu.  To select other System Utilities options, 
press the 

CURSOR

 button, and then use the 

VALUE

 knob to scroll 

through the menus.

HEADPHONE  VOLUME (HP VOL): 

The Headphone Volume option allows you to scale the headphone 
volume in relationship to the output volume. Since headphones can 
vary widely in their effi ciency to reproduce sound, this control allows 
you to set the headphone volume to a comforable listening level rela-
tive to the Output Volume control.  The parameter values are from 0 
(off) to 255 (max).

VERSION:

This menu option displays the current operating system version.

MASTER REBOOT/RESET:

This option performs a master reboot of the LP, similar to turning the 
power OFF and ON.  To perform this action, press 

ENTER

.

You will be asked to confi rm this operation (Yes/No).  If you are unsure, 
select NO and press 

ENTER

 to return to the System Utilities menu 

without any action. If you are sure, use the 

VALUE

 knob to change 

from NO to YES and press 

ENTER.  

This will reboot the system.

Summary of Contents for Little Phatty




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands