Moog Little Phatty User Manual Download Page 31 | Manualshive

Page: 31 / 59

background image

Page 32

LP User’s Manual - The User Interface

Page 33

LP User’s Manual - The User Interface

C. SYSEX (System Exclusive) menus

SysEx menus are a set of commands to transmit and receive selected presets, bulk dumps and fi rmware
dumps. To enable SysEx menus, press the

CURSOR

button. This will highlight the menu options shown

on the second line of the display. Once highlighted, use the

VALUE

knob to scroll through the menus. To

activate a command, press the

ENTER

button.

SEND CURRENT PRESET:

This option allows you to send the current preset (system exclusive
data format) for archiving a preset in the LP’s memory. This requires
another LP or computer with a MIDI interface and a program that can
accept a SysEx dump. You must enable the device that is to receive the
SysEx data. Once the remote device is enabled, press

ENTER

to start

the data transfer.

When

ENTER

is pressed, the LCD will briefl y display the ‘SENDING

CUR PRESET’

message shown. When the operation is complete, the

display will return to the SYSEX menu.

SEND ALL PRESETS:

This option allows you to send the system exclusive data for archiving
the complete bank of presets in the LP’s memory. To complete this
command, enable the device that is to receive the SysEx data. Once
the remote SysEx device is enabled, press

ENTER

to start the data

transfer.

When

ENTER

is pressed, the LCD will briefl y display the ‘SENDING

ALL PRESETS’ message shown and the

ENTER

button will stay lit until

the data transfer is complete. When the operation has fi nished, the
display will return to the SYSEX menu.

BULK DUMP:

This option allows you to save the entire state of the LP (including all
global data, performance set data and preset data) for later recovery.
To execute a bulk dump, enable the device that is to receive the SysEx
data. Once your remote SysEx device is enabled, press

ENTER

to start

the data transfer.

When

ENTER

is pressed, the LCD will briefl y display the ‘SENDING

BULK DATA’

message shown and the

ENTER

button will stay lit until

the data transfer is complete. When the operation has fi nished, the dis-
play will return to the SYSEX menu.

«
...
29
30
31
32
33
...
»

Summary of Contents for Little Phatty




























































Reviews:

No comments

Related manuals for Little Phatty

Piano Plus HP-30

Brand: Roland Pages: 10

Brand: CreamWare Pages: 7

Brand: CreamWare Pages: 12

Brand: CreamWare Pages: 36

Brand: Cwejman Pages: 52

Brand: TB-Electronics Pages: 40

Brand: Roland Pages: 8

Brand: Oberheim Pages: 25

Brand: Keysight Technologies Pages: 20

Brand: Roland Pages: 16

Brand: Roland Pages: 24

Brand: Roland Pages: 80

Brand: Roland Pages: 132

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands