background image

V1.1.0 RELEASE NOTES

Parameter ID

Parameter Name

Values

11

MIDI Channel OUT

0-15 = MIDI Channel 1-16 (Default: 0 / MIDI Channel 1)

12

MIDI Out Filter - Keys

0 = OFF, 1 = ON (DEFAULT: 1 / ON)

13

MIDI Out Filter - Wheels

0 = Off, 1 = On (Default: 1 / On)

14

MIDI Out FIlter - Panel

0 = Off, 1 = On (Default: 1 / On)

15

Output 14-bit MIDI CCs

0 = Off, 1 = On (Default: 0 / Off)

16

Local Control: Keys

0 = Off, 1 = On (Default: 1 / On)

17

Local Control: Wheels

0 = Off, 1 = On (Default: 1 / On)

18

Local Control: Panel

0 = Off, 1 = On (Default: 1 / On)

19

Sequence Transpose Mode

0 = Relative to First Note, 1 = Relative to Middle C (Default: 0 / First 
Note)

20

Arp/Seq Keyed Timing Reset

0 = Off, 1 = On (Default: 0 / Off)

21

Arp FW/BW Repeats

0 = Don’t Repeat end notes; 1 = Repeat end notes (Default: 1 / Re-
peat)

22

Arp/Seq Swing

0-16383 = 0 to 100% (Default: 8192 = 50% / no swing)

23

Sequence Keyboard Control

0 = Off, 1 = On (Default: 1 / On)

24

Delay Sequence Change

0 = Off, 1 = On (Default: 0 / Off)

25

Sequence Latch Restart

0 = Off, 1 = On

26

Arp/Seq Clock Input Mode

0 = Clock, 1 = Step-Advance Trigger (Default: 0 / Clock)

27

Arp/Seq Clock Output

0 = Always, 1 = Only When Playing (Default: 1 / When Playing)

28

Arp MIDI Control Mode

0 = Arp outputs MIDI notes, & ignores incoming MIDI when local 
control off. 1 = arp doesn’t output MIDI notes, is controlled by incom-
ing MIDI notes when local control is off. (Default: 0 / Arp outputs 
MIDI)

29

MIDI Sync Out

0 = Output MIDI Clock and Start/Stop, 1 = Output Clock but not 
Start/Stop, 2 = Don’t output MIDI Clock or Start/Stop (Default = 2 / 
Don’t output)

30

MIDI Sync In

0 = Follow MIDI Clock & Start/Stop, 1 = Follow Clock but ignore 
Start/Stop, 2 = Ignore MIDI Clock/Start/Stop (Default: 0 / Follow 
MIDI Clock & Start/Stop)

31

Follow Song Position Pointer

0 = Off, 1 = On (Default: 1 / On)

32

Clock Input PPQN Index

0-15 (Default: 3 / sixteenth notes [4PPQN])

33

Clock Output PPQN Index

0-15 (Default: 3 / sixteenth notes [4PPQN])

Global parameters for sysex editing

 (cont’d):

Summary of Contents for Grandmother













Reviews: