V1.1.0 RELEASE NOTES
Global Parameters
Group 1
Group Select Key
Parameter Select Key
1.1 Glide Type
F#2
F#0
Grandmother’s Glide type can be changed to best suit playing style or preference. There are three options - Linear Constant
Rate, Linear Constant Time, and Exponential. To change Grandmother’s Glide Type, press the (
F#2
+
F#0
) keys, and then use
the first three white keys to select LCR (
F0
), LCT (
G0
), or EXP (
A0
).
The Default is LCR.
1.2 Gated Glide
F#2
G#0
While Glide is in use, Gated Glide allows Grandmother to transition between the pitch of two notes only when a note is pressed.
The Glide transition halts in between notes and continues when a new note is pressed. If Gated Glide is off, the transition between
the pitch of two notes completes in the amount of time set by the
GLIDE
knob, regardless of whether or not a note is held. To
specify the state of Gated Glide, press the (
F#2
+
G#0
) keys, and then use the first two white keys to determine if Gated Glide is
OFF (
FO
), or ON (
G0
). The Default is ON.
1.3 Transposition Behavior
F#2
A#0
This setting determines how Grandmother will behave when its Octave settings are changed via the Left-Hand Control. To
specify whether Grandmother’s pitch is transposed Immediately, or when a New Note is played, press the (
F#2
+
A#O
) keys, and
then use the first to white keys to select New Note (
F0
), or Immediate (
G0
). The Default is New Note.
1.4 Tap-Tempo Clock Division Persistence
F#2
C#1
This setting determines whether the clock divisions specified while Tap Tempo is in use will persist when Tap Tempo is
disengaged or if the clock divisions will be reset to Eighth Notes when disengaged. Press the (
F#2
+
C#1
) keys, and then use the
first two white keys to determine whether Tap-Tempo Clock Division Persistence is OFF (
F0
), or ON (
G0
). The Default is OFF.
1.5 Velocity CV Output Range
F#2
D#1
Grandmother’s
VELOCITY CV
Output can be set to transmit velocity data at two different voltage ranges. To set the
VELOCITY
CV
Output range, press the (
F#2
+
D#1
) keys, and then use the first two white keys to select between -5V to +5V (
FO
), and 0V
to 10V (
G0
). The Default is -5V to +5V.
1.6 Oscillator 2 Frequency Knob Range
F#2
F#1
Hold (
F#2
)
and press (
F#1
)
to select. 0 Semitones / Off (
F0
), 1 Semitone (G0), 2 Semitones (
A0
) …
7 Semitones (
F1
) is the Default… 18 Semitones (
C3
). Osc 2 Freq Knob Range controls the amount of pitch detuning available
from the
FREQUENCY
knob in the Oscillator 2 section of the front panel. The default is 7 semitones; the range is 0 to 18
semitones, set using any of the white keys on the keyboard (lowest to highest white key sets range to be 0 to 18 semitones).
