Powering the media converter
The power options for the EOF2N media converter are product dependent. The following shows the power configuration.
EOF2N Back Panel Power
5
TX
RX
Fiber Port
EOF2N
Back Panel
Barrel Connector
5 - 50 VDC
Power adapter
AC power
1. Connect the barrel connector of the power adapter to the media converter’s power port (
located on the back panel of
the media converter
).
2. Connect the power adapter plug to AC power.
3. Verify that the media converter is powered up by observing the illuminated LED power indicator light on the front
panel.
6
Status LEDs
Use the LEDs to monitor the status of the media converter.
7
Front Panel
Power ON LED
FX-Link/Act LED
TX-Link/Act LED
LED discriptions are as follows:
FX-Link/Act LED
Green
ON = Link (
fiber
)
Flashing = Activity
TX -Link/Act LED
Green ON
= Link
Flashing = Activity
Power LED
Green ON = Connected to power
