TX
RX
Fiber Port
Copper and Fiber ports
The illustration below shows the front panel of the EOF2N media converters.
Power ON LED
Copper Port
TX-Link/Act LED
FX-Link /Act LED
Always observe the following ESD precautions when installing or handing the EOF2N media
converter:
• Do not remove the converter from its protective packaging until you are ready to install it.
• Wear an ESD wrist grounding strap before handling any module or component. If you do not have
a wrist strap, maintain grounded contct with the system unit throughout any procedure requiring
ESD protection.
CAUTION:
Intergrated circuits and fiber optic components are extremely susceptible to electrostatic discharge
damage. Failure to observe this caution could result in damage to these components.
Electrostatic Discharge (ESD)
1
2
