MOOER AUDIO CO.,LTD
www.mooeraudio.com
5
7
6
Power selection switch:
Selects the input AC voltage range 220V-240V or 110V-120V
Fuse Holder:
220V-240V = T200mA
110V-120V = T400mA
Power Socket:
Connect power chord provided to power on your
MACRO POWER S12
SPECIFICATIONS
*
Note: The device has a T200mA fuse attached in the Fuse holder
before being shipped out of the factory.
MACRO POWER LAYOUT
1 x 300mA DC output with selectable voltage switch.
9V, 12V, 15V or 18V
1
2 x 500mA 9V DC outputs
3 x 300mA 9V DC outputs
2
3
4
6 x 200mA 9V DC outputs
Please read these connection instructions carefully.
Connecting your devices to the wrong output may result in damage
to your device.
CONNECTIONS
RULES FOR PEDAL POWER
Always check the power requirements of any pedal or device
you wish to connect to MACRO POWER S12. The following rules
always apply.
All of the outputs on MACRO POWER have a centre pin - polarity ( ).
Current (mA) must meet at least the stated minimum requirements of
your pedal or device.
More mA is perfectly safe and even encouraged. Less mA than the
minimum stated requirements may be insufficient for your pedal or
device to operate correctly but will not cause damage to your device.
Power Cable
If your device requires centre pin + ( ) then please use the included
polarity conversion cable.
Power Supply:
220V-240V / 110V-120V
Output voltage:
11 x independent isolated 9V DC
1 x independent isolated DC 9V - 18V
Current Output:
Maximum total 3400mA output
Dimensions:
225mm(D)×88mm(W)×50mm(H)
Weight:
1.82kg
Part No:620010680
1
2
3
4
5
6
7
Voltage
(V), DC / AC
and Polarity ( / ) must always match
the requirements of your pedal or device exactly.
