34
www.
DEUBAXXL
.de
Enter the WiFi password
Plug the air conditioner into the mains socket
Confirm that the display is flashing quickly. (the module used may mean that it flashes
slowly. confirm anyway)
Tap continue
The device is automatically recognised
Unlink:
If you wish to operate the device via another WiFi.
Remove the device from the list in the app
Press the timer >3 seconds
Pull the mains plug
If linking fails:
Ensure that the WiFi is not working in the 2.5 GHz area
Unplug the air conditioner
Wait 30 seconds
Plug in the air conditioner again
Press the timer button >3 seconds
4.2.6 OVERLOAD PROTECTION
In the event of a power failure, a three-minute delay before the compressor restarts is provided to
protect the compressor.
4.3 DRAINAGE
AUTOMATIC EVAPORATION SYSTEM
The automatic evaporation system uses the collected condensate to cool the condenser coils for
more efficient performance. It is not necessary to empty the drainage container in cooling mode,
except in drying mode and under highly humid conditions. The condensate evaporates at the
condenser and is discharged through the exhaust hose.
For continuous operation or unattended operation in drying and heating mode, the connected
drain hose must be connected to the unit. The condensate can be automatically directed into a
bucket or drain by the gravity principle.
Switch off the unit.
Remove and store the outlet
opening’s plug.
Connect the drain hose properly
and ensure that it is not kinked and
is free of obstacles.
Place the hose outlet over a drain or
bucket and ensure that the water
Remove the rubber sealing
cap
