32
www.
DEUBAXXL
.de
4.2 SETTINGS
4.2.1 SWITCHING ON AND OFF
Press the POWER button to switch on the unit.
The unit runs in FAN mode by default.
Select the desired operating mode with the MODE button.
Press POWER again to switch off the unit
4.2.2 OPERATING MODE
The unit has five operating modes: cooling, drying, ventilation, heating, energy-saving mode.
A.
COOLING THE ROOM
Select the cooling mode to lower the temperature in your room.
Press the MODE button several times until the COOL operating mode’s LED lights up.
Press the Up/Down button to set the temperature displayed on the screen. The temperature
can be set between 16
℃
and 32
℃
.
Press the SPEED button repeatedly until the desired speed’s display lights up.
The inner ventilation louvre is adjusted manually to control the direction of the air flow
horizontally.
Note: The system is switched off when the room temperature is lower than the selected temperature.
B.
HEATING THE ROOM (OPTIONAL ONLY FOR THE MZKA1000 FUNCTION
UNIT)
Press the MODE button repeatedly until the HEAT mode LED lights up.
By pressing the Up/Down button, the temperature can be set higher than the room
temperature. The fan speed can also be adjusted.
Note: The exhaust air hose must be connected to the unit for continuous operation.
C.
ROOM VENTILATION
Press the MODE button several times until the FAN mode LED lights up.
In ventilation mode, the room air is circulated but not cooled.
The desired fan speed can be selected by repeatedly pressing the SPEED button.
D.
DRYING THE ROOM
Press the MODE button on the control panel or remote control. The LED for DRY mode lights
up. The fan speed cannot be adjusted. The user should connect the hose to the drain outlet on
the underside of the unit.
Note: In this mode, the fan speed is switched to a low speed and cannot be adjusted.
E.
SLEEP MODE: THIS FUNCTION CAN ONLY BE PERFORMED WITH A REMOTE
CONTROL.
The energy-saving and sleep mode can be activated in both cooling and heating mode.
