www.Deuba24online.de
www.Deuba24online.de
Location of controls
1 Contact Surfaces
2 Display
3 DOWN-button
4 UP-button
5 SET-button
Display Symbol
Meaning
kg/ lb/ st
Body Weight
USER 0-9
User memory space
Male / Female
cm (Ft:in)
Body height
Age
Age
FAT
Body fat display
TBW
Body water display
MUS
Muscle mass display
BONE
Bone weight display
BMI
Body fat index
KCAL
Body energy
Information on Measuring Body Fat
WARNING:
Do not use the scales if you use a pacemaker or
another medical implant with electronic com
-
ponents. The function of the implant may be
impaired by the measurement.
NOTE:
The device can only function correctly if you
stand on the contact surfaces with bare, dry feet!
The main principle of this device is based on the
measurement of the electric impedance within
the human body. In order to determine the
actual body data, the device leads a weak, unno
-
ticeable electric signal through your body.
The signal is generally safe! However, please read
our special safety instructions!
The method of measurement is referred to as
“bioelectric impedance analysis” (BIA), a factor
which is based on the relationship between body
weight and associated body water percentages
as well as on other biological data (age, gender,
body weight).
There are heavy persons with a well-balanced
percentage between fat and muscle mass, and
there are seemingly slim persons with signifi
-
cantly high body fat values. Fat is a factor that
puts serious strain on the body, in particular the
cardiovascular system. Therefore, controlling
both values (fat and weight) is a prerequisite for
health and fitness.
Saving Personal Data
NOTE:
• The scale has default values that you can
change, as described below.
• Carry out the following steps in sequence and
within a few seconds. Otherwise, the device will
automatically cancel input mode.
• Press the button SET. The memory space will
flash on the display (USER). Confirm the setting
by pressing SET or select another memory space
by pressing the UP / DOWN button. Then press
SET to go to the next setting.
• The symbol for “male” or “female” will flash.
Confirm the setting by pressing SET or use the UP
/ DOWN button to choose the symbol for your
gender. Then press SET to go to the next setting.
• The height setting will flash. Select your height
by pressing
UP or DOWN button. Holding down one of the
buttons will accelerate the process. Confirm your
entry by pressing SET.
• The setting AGE will flash. Select your age by
pressing UP or DOWN button. Holding down one
of the buttons will accelerate the process. Con
-
firm your entry by pressing SET
• The default symbol for the “un-athletic “type
flashes. Which type do you consider yourself to
be? Select your type using the UP or DOWN but
-
ton: “un-athletic“, “average“or “athletic“. Confirm
your selection with SET.
• If only the stored position and the display 0.0
kg (0.0 lb) is still shown, input mode for this
stored position is completed.
10
11