Monument Grills 86030, Assembly & Operating Instructions

Page: 22 / 27

‐ 22 ‐
7.5 Ignition Instruction
WARNING: Before placing pellets into the fire pot, make sure the grill is NOT on, and Fire Pot
is NOT hot to prevent possible skin burn.
1. Security Check before powering on, make sure there is no damp or bare wire in the socket and
plug.
2. Take out cooking grid, grease drain pan, and flame tamer successively in the interior of grill until
the fire pot is seen.
3. Clean up the residual ash and obstruction in the fire potbefore each ignition.
*Tip: In initial use of the grill, to ensure the igniting successfully, manually put a small
number of pellets into the fire pot until the Igniting Rod is just covered by pellets.
4. Place the sealing plate, oil guide plate and baking net successively, and close the furnace
cover.Turn on the
Power button and select Cook or Smoke mode.
5. When the device starts to ignite, there will be a large amount of smoke. People can wait for the
device to ignite before using it.
Note that to save electricity, the ignition rod will only work when the switch is on for the first time and
the Cook or Smoke mode is selected. So, if the oven is not lit, turn off the Power button and repeat
step 4
。
7.6 Turn off the Device