17
HOW TO CHECK THE PLAYS IN THE HEADSET ADJUSTMENT
Place oneself by the vehicle with the feet on the ground.
Squeeze the front brake while moving the vehicle forwards and backwards
.
Check if the
headset is loose. The headset is formed by guards and bearings which are in contact to
the frame below and above.
The handlebar and stem fitting can have a small play due to the stem holding system.
HOW TO CHECK THE HEADSET’S ADJUSTMENT
Place oneself by the vehicle with both feet on the ground. With the front wheel resting on
the ground, turn the fork and handlebar from left to right and vice versa. Look, listen and
feel if the headset is too tight, making a noise as turning or snagging at different points.
ADJUSTMENT
Adjusting the headset requires special tools and expertise. Please see section: Stem
adjustment and subjection. In case of any doubt, please check it with an authorized
dealer.
LUBRICATIÓN
The headset should be lubricated once a year. This requires specific know-how,
expertise and special tools, for this reason only an authorized dealer should do it.
ATTENTION: An incorrect headset adjusting may cause one to lose
control of the bike and fall down. Ensure that the headset and stem to be
correctly fitted before each use.
10.4 BRAKES
Ensure the correct work of the brakes. DPIE3 is only provided with a sole disc brake per
cable to the front wheel which allows to stop the vehicle without problems. The brakes
shall work and allow the vehicle stop at a safety and proper distance. On using the brake
lever, the engine is also disconnected. Check the brake shoes not to show any excessive
wear.
The DPIE 3 model is fitted with a mechanical disc brake system.
The brake system of this vehicle allows getting down the speed, a very safety critic
function. The following item explain how to inspect, adjust and even lubricate the DPIE 3
brakes.
CAUTION
:
As any braking system, an incorrect adjustment, poor
maintenance, or a bad use of the brakes may cause one to lose control of the
vehicle with all the consequences that this may imply. Never use the bike if the
braking system is not working correctly or if you suspect any type of problem
either with the brakes or their cables. If the brakes are not working correctly, one
may lose control and fall down. If the DPIE 3 is not working properly, fix it or
take it to an authorized dealer.
Adjusting the brake system is difficult if one does not have the necessary know-how,
experience and the necessary tools. We strongly recommend that any adjustment to the
brakes be carried out by an authorized dealer.
Summary of Contents for DPIE 3
Page 1: ...DPIE 3 USER S MANUAL...
Page 2: ...2...
