OPI-PulseNGKit-en-141106
Version: 2.01
Page 21 of 31
R
0 2 1 , 7 2 5 , 1 * 6 2 / 8 7 , 2 1 6
Operating Manual
PulseNG
Kit
Config
1
Reset alarms
Teach
Settings
Save limits
Event Log
Config
Login
Statistics
PulseNG-hmi
pulseNG
R
0 2 1 , 7 2 5 , 1 * 6 2 / 8 7 , 2 1 6
/
/
0
08:DC:1C:72:44
000,Bl: 0.00B00, App: 0.00B00
192.168.1.241
0.0.0.0
0.0.0.0
255.255.255.0
1
255
Help
Scenario
Service
Default
Select sensor
OK
Cancel
Global
Debounce time (ms):
MAC address (hex):
IP address:
Gateway:
Set time/date on startup:
Average of peaks
Adjust time/date
IBU time and date:
PC time and date:
Synchronize time:
Plot
Sensor axes:
Machine axes:
Machine name:
Machine interface
Input:
Output:
Language:
English
X-Axis
X-Axis
Y-Axis
Z-Axis
Module
Temperature
Background
DSP
Monitoring
Y-Axis
Z-Axis
N.O.
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
N.O.
N.O.
N.O.
N.O.
N.O.
N.O.
N.O.
N.O.
N.O.
never
Teach mode:
Firmware version:
Subnet mask:
DNS:
Monitoring:
Teaching:
Scenario #:
Figure 15:
Config
Global (Global settings)
Language:
Language selection
Debounce time:
Length of time a signal has to queue to be accepted
as valid signal.
Set time/date on startup
Check for automatic synchronization of IBU time/date
to PC at each program start.
Adjust time/date
One-time manual synchronization of IBU time/date to
PC.
Teach mode:
Possible settings:
Maximum peak / Average of peaks
MAC address
display only
IBU time and date:
display only
Firmware version:
display only
IP address:
192.168.1.241 (default setting)
PC time and date:
display only
Subnet mask:
255.255.255.0 (default setting)
