montpellier DO3550UB, Installation And Operating Instructions Manual

Page: 23 / 32

UsInG tHe clock/pRoGRaMMeR-elec
3) After counting down stopping, if
there’s no operation for 2 minutes,
buzzing will stop.
4) If set duration time before end time,
end time can only be added, not
decreased. (The max time added can be
after 23h 59m. When end time is longer
than duration time+ current time, end
time can be decreased by pressing
button 2. It will be decreased until end
time equals to duration time+ current
time+ 1 minute). If end time is longer
than duration time+ current time, power
will be off, end time icon will display.
When end time equals to duration time+
current time, power will be on again, end
time icon will turn off.
3
、
time function
1) Press button 1 to choose time
function. Time icon will flash, press
button 2 or 3 to set time. The range is
24hrs. Press once to plus or minus 1,
hold for 3 seconds for quick-adjust. No
operation for 5 seconds, the time of day
will show, time icon will turn off.
2) If time setting is changed after
setting alarm, duration and end time,
the alarm will not be changed, and
duration and end time will reset.
4
、
lock function.
Press lock button for 3 seconds any
time, the lock function will active, and
lock icon will display. Press lock button
for 3 seconds again, it will be unlock.
The icon turns off.
During the lock condition, press button
will cause buzzing, meanwhile the lock
icon will flash for 3 seconds.
5
、
Other notification
1) If setting alarm, duration time and end
time, alarm time will display, and alarm,
duration, end time icons will display.
2) After setting alarm, duration, and end
time, Button 1 can be pressed to check
and change alarm time, duration time,
end time and day time.
3) If duration time is later than alarm
time, there will be only buzzing for
alarm. If duration is earlier than alarm
time, there will be only buzzing for
alarm.
21