PVVEX58-300 & PVVEX510-300 Horizontal Power Vent
Page 12
XG0518 - 070714
Step 6:
Cut white fibre from power cable, black wire from capacitor
and black wire from motor.
Figure 5e.
Step 7:
Remove and dispose of old capacitor and open REC1252
Figure 5f.
REC1252
Step 8:
Strip ends of all cut wires and new capacitor. Screw new
capacitor and ground wire to the motor using the existing screw you
saved.
Figure 5g.
Step 9:
Using a small bell connector, connect the blue wire from the
motor to the black fibre wire from the power cable.
Figure 5h.
Step 10:
Using the large bell connector, attach the white fibre wire
from the power cable to the black wire from the motor and a black
wire from the capacitor.
Figure 5i.
Step 11:
Using the other small bell connector attach the brown wire
from the motor to the other black wire from the capacitor.
Figure 5j.
Service
