XG0528 - 170223
26
Installation
3. Place the second log in the footprint of the log burner outlined
below.
6. Place the fifth log on top of the first log and the fourth log. The
first log has a ceramic pin to locate the fifth log. The fifth log
locates to an edge on the fourth log.
4. Place the third log on the ceramic burner. Them ember part of
the log locates on an ember on the burner. The front of the log
locates to a groove in the burner
7. Place the sixth log on top of the third log and the ceramic burner.
The sixth log has a v-shaped notch that matches with a v-shaped
peak on Log 3. The end of Log 6 matches up with a cradle in the
ceramic burner.
5. Place the forth log on top of the third log and the first log (as
shown below). There are two v-shaped notches in Log 4 that
match with two v-shaped peaks on Log 1 and Log 3.
Figure 8.14
Figure 8.17
Figure 8.15
Figure 8.18
Figure 8.19
Figure 8.16
