Page 37
XG00516-060614
I-Series Indoor Gas Fireplace
Installation
6).
Slide the rear panel behind the right panel and push the right
panel back holding the rear panel in place.
Figure 12 Sec.9
7).
There is a securing hole in the bottom of the side panels.
Using one of the supplied screws, secure the side panel to the
bottom panel retainer. You may need to push the panel back into
the firebox to get the holes to line up.
Figure 13 Sec.9
8).
Slide the left panel into the firebox until it touches the rear panel.
Secure with the supplied screw into the bottom panel retainer.
Figure 14 Sec.9
9).
If needed, push the top panel retainers in with a screw driver
to keep the panels tight against the firebox.
Figure 15 Sec.9
