background image

1

888

557

3848

Wards.com      

   8

   9

Overload Protection

The reciprocating saw and its battery have built-in safety features to prevent  

damage to the tool and battery during use.
•  During short-term high-load situations, the overload protection will automatically 

turn off the saw. If this happens, release the trigger, wait a few seconds, ensure 

that there is no load and then restart the saw. For high-load situations that oc-

cur for an extended period of time, wait until the saw returns to normal operat-

ing temperature before trying to restart it. Adverse temperatures can occur in 

direct sunlight and should therefore be avoided.

•  When the battery becomes discharged, the low-voltage protection turns off the 

saw automatically. Recharge the battery to continue use.

Parts & Features Worklight

1

3

4

1. Pivot connection

2. Power button

3. Grip handle

4. Battery release button

2

How to Use the Worklight

1.  Insert rechargeable battery and push until it clicks in place.

2.  Press the power button to turn the worklight on or off.

3.  Pivot the worklight head up to 95

°

.

4.  To remove the battery, press the battery release button.

Charging the Battery

IMPORTANT:

 Batteries need to be fully charged before initial use.

Do NOT charge batteries in direct sunlight. Charge in temperatures between 41

104

°

 F.

1.  Remove battery from drill/worklight by pressing the battery release button and sliding 

it forward. If the battery feels overly warm, allow it to cool down before charging.

2.  Connect the battery charger to an electrical socket. The green light will illuminate. 

3.  Insert the battery into the charger. While the battery is charging, the red light will 

blink and the green will stay steady. Once the battery is fully charged, both red and 

green lights will shine steadily. 

4.  To remove the battery from the charger, press the release button on the battery.

NOTE: 

If the red light on the charger blinks three times per second while the green light 

is steady, the battery needs to be replaced.

IMPORTANT:

 Batteries should be fully charged for long-term storage.

Summary of Contents for DMF-008C








Reviews: