Twist lower cover plate into place by
twisting in direction of arrow.
31
Replace 1 screw removed and tighten
all 3 screws securely.
Plug white wire from fan to white
wire from light kit. Then plug black
wire from fan to black wire from light
kit.
32
34
Install 3X40 watt candelabra base
bulbs. Bulbs included.
WARNING:
Over lamping the fan will result in the
fan lights shutting down until the
proper wattage of bulbs are installed.
Reset the lights by turning off the wall
switch, breaker,or by remote. Replace
bulbs with the correct wattage bulbs, turn
the power on.
36
Align the arches from the light kit
with the arches from the upper light
kit. Install the bottom finial cover by
twisting on securely.
35
Install the bottom cover plate by
placing over the threaded rod. Install
the bottom finial cover by placing
over the threaded rod and screw on
the bottom finial cover securely.
33
Install the glass and secure by
twisting on the finial. Tighten
securely.
37
To install with-
out light kit go
to step 33.
To install with
light kit go to
step 34.
Install wall control unit to outlet box
using machine screws provided.
39
Attach front cover to wall control
with screws provided.
40
black
AC 120V input
38
black
White
White
ground
green
Warning! If unsure of wiring please contact an
electrician. Connect to hot and common wire of
electric circuit separately. Refer to diagram
above.
Avertissement ! S'incertain du câblage svp con-
tactez un électricien. Reliez au fil chaud et com-
mun du circuit électrique séparément. Référez-
vous au diagramme ci-dessus.
38
CA 120 V
entrée
