© 2011 Monte Carlo Fan Company
1/9/2012
4
Install blade arms using screws and washers
provided. Tighten securely. Repeat for all 5
blades.
14
Check the motor for plastic shipping stabilizer
tabs, and remove them if they are present. At-
tach blade assembly to motor using the motor
screws and washers provided. Tighten screws
securely.
15
After attaching blades install the switch housing
using the three screws previously removed.
Setting the reverse switch in the left
hand side will result in downward air-
flow and setting the switch in the right
hand side will result in upward airflow.
16
Make wire connections to power source using
wire nuts provided. Make sure that no filiments
are outside of the wirenut. After making the
wire connections, the wires should be spread
apart with the grounded conductor and the
equipment-grounding conductor on one side of
the outlet box and ungrounded conductor on the
other side of the outlet box.
10
For pullchain controls, follow diagram above.
Make sure that all exposed wiring is secured in-
side wire nuts. Note: Wires from house may
vary in color and may not include ground wire.
After wiring is conplete, gently push wires into
junction box with wire nuts pointing upward.
Refer to point 3 of safety tips.
11
House
Fan
Black
White
Green
Black
White
Green(downrod)
Green(Bracket)
Blue
For control of fan and optional light from wall lo-
cation, follow diagram above. NOTE: A profes-
sional electrician is recommended for this type
of installation.
12
Raise the canopy up and align the two holes in
the canopy with the two holes in the hanger
bracket. Secure with two screws provided.
13
L
ig
h
t
S
w
it
ch
F
a
n
S
w
it
ch
Wall
Control
Reverse
switch
Summary of Contents for 5AB52XX Series
Page 6: ...Jan 2012 New format ...
