![background image](http://html.mh-extra.com/html/attwood/9040-4/9040-4_instruction-manual_3005793001.webp)
Ultimate Rechargeable Fan
©2014 Attwood Corporation 1016 North Monroe Lowell, MI 49331 www.attwoodmarine.com
Instruction Sheet 69534 RevA 1/14
#9040-4
• When storing, place in a dry, secure location to avoid damage.
• When transporting, make sure the fan is placed in a dry, secure
compartment or location and that the product is protected against
damage from other gear.
• Ensure that the control switch is in the off position when the fan
is not in use.
• Turn off and unplug fan before cleaning – see Care and
Maintenance for cleaning.
• Do not position the fan too closely to any object which may be drawn
into the blades.
• While using the fan under battery power and the power cord adaptor
is not plugged into the fan adaptor jack the fan will automatically be
in the battery saver / soft start mode. When in this mode there is an
automatic 3 second delay when set at the initial speed setting. This
is normal operation and saves battery life when not charging or
using an external power source.
• Examine components periodically to ensure that the fan and its
components show no signs of wear or age, and that it is in good
working order. Discontinue use immediately if any signs of wear
or degradation of any kind exist on the fan or its components.
Instructions for use:
Congratulations on purchasing the Attwood Ultimate Rechargeable
Fan. This unique product is designed to be used as a portable unit
for multiple activities, including marine, recreation and home use.
This product has been designed for years of operation.
Operation:
Soft Start / Battery Saver:
While using the fan under battery
power and the power cord adaptor is not plugged into the fan
adaptor jack the fan will automatically be in the battery saver /
soft start mode. When in this mode there is an automatic 3
second delay when set at the initial speed setting. This is
normal operation and saves battery life when not charging or using
an external power source.
1. For best performance using battery
power, make sure that the fan is
fully charged using AC/DC adaptor
or plugging the 12 volt adaptor into
a power outlet.
2. The adaptor jack is located below the
speed control knob, on the right side,
see figure #1.
3. First insert the adaptor plug into the
fan and then plug into the power source
with the 12 Volt or AC/DC adaptor.
continued on back
READ AND SAVE THESE INSTRUCTIONS
WARNING
THIS PRODUCT IS NOT INTENDED FOR USE BY CHILDREN
Description
Quantity
- 12 inch Rechargeable Fan Assembly
1
- Removable Support Feet
2
- AC / DC Adaptor
1
- 12 Volt Power Adaptor Assembly
1
- Instruction Sheet
1
Remove all parts from packaging. Verify that all parts are present
prior to use.
Attaching the Feet:
Align the foot over the post and parallel with the bottom of the fan
housing. Slide foot onto post and rotate perpendicular. Repeat steps
for second foot.
WARNING
• Read all instructions thoroughly prior to use.
• To reduce risk of personal injury, fan should not be used where
small children can reach or access the fan or the charging cord.
Close supervision is necessary when any appliance is used
around children.
• Do not operate fan in the presence of explosive and/or flammable
fumes.
• Do not operate unit with damaged cord assemblies or plugs, or if
the unit has received a sharp blow, been dropped, or otherwise
damaged in any way. Do not disassemble unit. Incorrect reassembly
may result in a risk of electric shock or fire.
• Do not place fan near extreme heat or place directly in fire.
Damage may occur to the fan or its components and batteries
may explode or leak.
• To protect against electrical shock, do not expose to rain or spray,
immerse in water, or use on wet surfaces. Never allow water to
enter motor housing or charging adaptor. Only use AC / DC
adaptor indoors.
• To avoid personal injury or property damage use only approved
AC / DC adaptor.
• Do not stick fingers or other objects inside the fan grill.
Step
Align the foot over the post and parallel with the bottom of the fan housing.
Step
Slide foot onto post and rotate perpendicular. Repeat steps for second foot.
figure #1