Montarbo TANK201P, Instruction Manual

Page: 5 / 16

The trademark Neutrik Speakon
®
is property of Neutrik
9
ENGLISH
A Tank24SP : two 12" custom built long-excursion woofers, with
super-vented neodymium magnets (in order to minimize the power
compression effect) and long excursion 2.5" voice-coils.
The carefully designed ported cabinet allows for their uncompressed
low frequency projection.
Tank20SP
: two
10"
custom built long-excursion woofers, with
super-vented neodymium magnets (in order to minimize the power
compression effect) and long excursion 2.5" voice-coils.
The carefully designed ported cabinet allows for their uncompressed
low frequency projection.
B
Tuning port.
D
D
B
E E
A
F
G
C
TOP VIEW
LINK IN SAT OUT
min 8 Ohm min 8 Ohm 8 Ohm
C
The cabinets, characterized by an essential and rigorous style,
are built from 15mm birch multiply and finished with a special
anti-abrasion paint.
D Steel protection grille.
E
Transport handles.
F
Connection panel.
G Speaker stand adaptor.
Construction and components conform to the highest professional
standards for maximum reliability.
Tank24SP / Tank20SP - Description
Connections are the same for both models.
1 IN: input connector. It is a Speakon® socket. Connect it to the
power amplifier or to the powered mixer output.
See connection examples on pages 27 and 28.
2
LINK: Speakon® socket for parallel connection of another spea-
ker system. Always pay attention to the total impedance.
See connection examples on pages 27 and 28.
3
SAT OUT: Speakon® socket connected to the passive filter
output. Use it for the connection of a TANK241P/TANK201P used a
passive satellite. See connection examples on pages 27 and 28.
Tank24SP / Tank20SP - Connections panel
LINK IN SAT OUT
min 8 Ohm min 8 Ohm 8 Ohm
2 1 3
Never connect two power amplifiers to the same
speaker system: doing this may result in serious damage
to the amplifiers.