MT160A
11
Control and connection panel
ENGLISH
7
3
1
1
Unbalanced microphone input (-40dB / 2k
Ω
)
with Jack socket.
☛
See 'connections & applications' at pages
17
,
18
,
19
,
20
,
21
,
22
,
23
.
2
Microphone input level control.
3
Two independent, mixable, line inputs (-10dB/
22k
Ω
), with unbalanced Jack sockets.
☛
See 'connections & applications' at pages
17
,
18
,
19
,
20
,
21
,
22
,
23
.
4
Level control for the two line inputs.
☞
Set it to the “0 dB” position when the MT160A is connected
to a mixer output directly or through the electronic crossover of
an active subwoofer (see pages 18 e 19).
5
Peak LED indicator. It is of great help to get
an idea of the output level: • if it never blinks,
this means that the working condition is still
below the power limits of the system. • occasional
blinking of this LED indicates that the working
condition is near to the maximum level, (yet the
musician's ear still continues to be the best judge
of the signal quality).
6
Equalization control. The EQ control allows to
change the response curve of the system
depending on the requirements of each different
application. This enables optimizing the MT160A's
working condition for each specific requirement
whether it is used for example in a conference hall,
on stage for monitoring or in other situations.
☛
See EQ control settings examples at page
12
7
Mixed line-level output. It can feed another
MT160A, your personal DAT recorder, a camcorder,
a further mixing console....
☛
See connection example at page
17
.
8
Mains power 'on/off' switch.
9
Mains supply cable.
2
4
5
6
SERIAL N.
220V
50-60Hz
POWER
MADE IN ITALY
INTERNAL FUSE T 0,5A
PROCESSOR CONTROLLED POWERED MONITOR
-10 dB
MIC
0
-40 dB
Montarbo
MIXED LINE OUT
POUR PREVENIR RISQUE DE CHOC
ELECTRIQUE, NE PAS OUVRIR
CAUTION :
TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE COVERS.
I
0
PEAK
EQ.
0 dB
MT 160 A
1
LINE
2
8
9
1
GND = Ground
2
+ = Hot
1
GND
2
+
2
+
1
GND
UNBALANCED
JACK
CONNECTOR
