RMD801 - RMD801BH
| Owner’s manual
7
RECEIVER
ANT-A – ANT-B
It is the flexible antenna. To get effective transmission, never cover the antenna with hand, clothes etc during the
operation, and always position the transmitter nearby the receiver.
LEVEL Control
This knob sets the audio signal level outputted through the balanced and unbalanced output jacks on the rear panel.
Turn the knob clockwise fully for the max volume, and turn the knob counterclockwise fully for the min volume.
IR Transmitting Section
During “IR SET” an infrared light is used to set the transmitter channel.
AF
When this LED is illuminating, it means that the signal of the microphone is too strong.
DISPLAY
The display shows the exact channel selected from 00~99, totally 100 channels.
DIVERSITY LED A – B
These two LED will light up when the ANT-A and ANT-B are used.
UP/DOWN
Operation button.
POWER Switch
It switches on/off the main power.
DC Input
Connect the unit with the adapter for DC power supply. Refer to Fig 1.
Fig 1
MIC OUT BALANCED
XLR type connector outputs the balanced AF signal.
LINE OUT UNBALANCED
TS type jack outputs the unbalanced AF signal.
1
2
3
4
5
6
7
8
9
10
11
DC 15V
300m A
