background image

Owner’s manual  |  

RMD801 - RMD801BH

4

RMD801 - RMD801BH

Disposing of this product should not be placed in 
municipal waste and should be separate collection.

The symbol is used in the service documentation 
to indicate that specific component shall be only 
replaced by the component specified in that.

Protective grounding terminal.

The symbol is used to indicate that some hazardous 
live terminals are involved within this apparatus, 
even under the normal operating conditions.

SAFETY RELATED SYMBOLS 

WARNING

• Power Supply

Ensure the source voltage matches the voltage of the power 
supply before turning ON the apparatus.
Unplug this apparatus during lightning storms or when  un-
used for long periods of time.

• External Connection

The external wiring connected to the output hazardous live 
terminals requires installation by an instructed person, or the 
use of ready-made leads or cords.

• Do not Remove any Cover

There are maybe some areas with high voltages inside, to 
reduce the risk of electric shock, do not remove any cover if 
the power supply is connected.

The cover should be removed by the qualified personnel only.
No user serviceable parts inside.

• Fuse

To prevent a fire, make sure to use fuses with specified   
standard (current, voltage, type). Do not use a different  fuse 
or hort circuit the fuse holder. 
Before replacing the fuse, turn OFF the apparatus and dis-
connected the power source.

• Protective Grounding

Make sure to connect the protective grounding to prevent any 
electric shock before turning ON the apparatus.
Never cut off the internal or external protective grounding 
wire or disconnect the wiring of protective grounding termi-
nal.

• Operating Conditions

This apparatus shall not be exposed to dripping or  splashing 
and that no objects filled with liquids, such  as vases, shall 
be placed on this apparatus.

To reduce the risk of fire or electric shock, do not expose this 
apparatus to rain or moisture.

Do not use this apparatus near water. Install in accordance 
with the manufacturer’s instructions. Do not install near any 
heat sources such as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce heat. Do not 
block any ventilation openings.

No naked flame sources, such as lighted candles, should be 
placed on the apparatus.

Alternating current/voltage.

Hazardous live terminal.

ON      Denotes the apparatus turns on.

OFF    Denotes the apparatus turns off, because of using 

the single pole switch, be sure to unplug the AC 
power to prevent any electric shock before you pro-
ceed your service.

WARNING Describes precautions that should be observed to 

prevent the danger of injury or death to the user.

CAUTION Describes precautions that should be observed to 

prevent danger of the apparatus.

Documentation for safety reasons:

Summary of Contents for FiveO RMD801















Reviews: