RMD801 - RMD801BH
| Owner’s manual
5
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
• Follow all instructions.
• Keep these instructions.
• Heed all warnings.
• Only use attachments/accessories specified by the man-
ufacturer.
• Power Cord and Plug
Do not defeat the safety purpose of the polarized or grounding
type plug.
A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety.
If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched par-
ticularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Cleaning
When the apparatus needs a cleaning, you can blow off dust
from the apparatus with a blower or clean with rag etc.
Don’t use solvents such as benzol, alcohol, or other fluids with
very strong volatility and flammability for cleaning the appara-
tus body. Clean only with dry cloth.
• Servicing
Refer all servicing to qualified personnel. To reduce the risk
of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are quali-
fied to do so.
Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liq-
uid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
The mains plug is used as the disconnect device, the discon-
nect device shall remain readily operable.
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC Rules and Regulations
MARKUS wireless receivers are certified under FCC Rules part
15 and transmitters are certified under FCC Rules part 74. Li-
censing of MARKUS equipment is the user’s responsibility and
licensability depends on the user’s classification, application
and frequency selected.
NOTE
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the
FCC Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Montarbo
®
declares that this wireless microphone is in com-
pliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
