Owner’s manual |
P6AM
8
P6AM
CONTROL ELEMENT
MONITOR
Via this Control, you can adjust the signal Level applied to MONITOR OUT sockets.
POWER LED
This LED will blink when your P6AM is switched ON.
PRESETS
Adjust this knob to select the desired effect.
AUX/DFX RET
This control is used to adjust the level of the signal coming from internal multi-effect.
DSP MUTE
This switch is used to activate/deactivate the resident multi-effect.
PEAK LED
This LED lights up when the input signal is too strong. In case of the digital effect module being muted, this LED
also lights up.
15
16
17
18
19
20
CONTROL ELEMENT
POWER ON/OFF
This switch is used to turn the main power ON/OFF.
AC POWER SOCKET WITH MAIN FUSE
22
21
21
22
REAR PANEL
