Owner’s manual |
P6AM
6
P6AM
DESCRIPTION
CONTROL ELEMENT
THE MONO INPUT CHANNELS
These are marked CH1 to CH4 and include a balanced COMBO socket (MIC IN). Use the COMBO socket to connect a low
impedance balanced dynamic microphone or a low level signal.
You can also connect a condenser microphone into the COMBO socket.
PHANTOM POWER SWITCH
When the (2) switch is at ON position, a +15V phantom power will be applied to CH1 through CH4.
Only Condenser microphones need Phantom Power, so switch it OFF when you use dynamic microphones.
TAPE IN/3.5mm JACK
Here you can connect a stereo Line Level via RCA sockets. Usually this stereo channel will be used to connect into
the P6AM with the audio output of a Computer, or a CD Player, iPOD, MP3 player, etc.
TAPE OUT
Via these two RCA sockets you can route out the Main Stereo signal usually to a Recorder Device.
LEVEL CONTROL
It adjusts the LEVEL of individual channels with a range from -∞ to +10 dB.
1
2
3
4
5
20
19
18
17
16
8
13
15
9
10
12
11
2
14
4
3
1
5
7
6
