Montanari RQ 200, Manual

Page: 9 / 36

45
www.montanarigiulio.com
ENGLISH SPEED GOVERNORS: RQ-A & RQ
• Use of accessories and/or spare parts which are unsuitable or non authori-
zed/genuine by Montanari.
In particular:
• During transport, assembly, installation, operation, maintenance and di-
smantling of the unit, the relevant environmental and safety standards must
always be complied with.
• The unit must only be used, maintained and repaired by authorized, properly
trained and qualified personnel.
• The governor must not be cleaned using high-pressure cleaning equipment.
• All work must be carried out with care and with due attention to safety.
• Any work on the unit should only be carried out when it is not in operation.
• No welding must be carried out on the unit.
• Do not use the unit as a grounding point for welding operations.
• If the unit is intended for installation in plant or machinery, the manufacturer
of such plant or machinery must ensure that the standards, indications and
descriptions contained in these operating instructions are incorporated into its
own instructions.
• The information on the warning or identification plates must be complied
with. These plates must be kept clean and legible at all times. Missing plates
must be replaced.
All spare parts can be obtained from Montanari Group.
2.3 Proper disposal
Respect the environment and dispose of the product according to the
regulations in force in the country of installation.
2.4 Safety of operators
For the safety of operators and other people, the following procedures are
compulsory:
• Use the safety devices preventing fall (platform and or harness).
• Cover any holes on the ground.
• Protect installation tools or objects from accidental fall.
• Use fences to protect the openings of the lift shaft and position warning
signs when working on the same.
! !