User Guide
13
Note:
Use the number keys to select the first letter. For example, 2 = A, B, C, 2. Then use the
Up/Down Arrows to choose the exact model name. If your device model is not listed, choose a
similar model number if possible.
For
Use code learned with PC Setup Wizard
, it will be necessary to, first, setup your Vulkano to
learn your remote control codes.
1.
Select
Use code learned with PC Setup Wizard
2.
Press
OK
For information about assigning control codes, please refer to the
Learning Remote Control
Commands (For PC)
on page 46, or
Learning Remote Control Commands (For Mac)
section on
page 54.
STB
T
UNING
T
EST
To test the remote commands:
1.
Press the
CH+
and
CH-
buttons
2.
Press
OK
Using the Arrow buttons on your Vulkano remote:
Select
It worked
if the remote commands work
Select
It didn’t work
if the remote commands
failed, and follow the instructions
Select
Try again
to test the remote commands
again
Select
Continue
anyway
to skip the test and try
again later
Press
OK
Note:
If the STB tuning test still does not work, you may need to set up your
IR Blaster
cable.
Please refer to the
Setup The STB Control
section on page 55.
