Monsher MGG 30, User Manual, Page: 38 / 68

English
38
5.3 Cleaning the range
B
There is no need for any range cleaner or other special cleaning agent to clean the range. It is
recommended to qipe the range with a damp cloth when it is stil likewarm.
B
6. SUGGESTED SOLUTIONS FOR PROBLEMS
Product does not operate.
B
The product is not plugged (earthed) to the socket. Make sure the equipment is plugged.
B The fuse is burn or broken. Check the fuse in the fuse box. If the fuse is burnt, activate it again.
The product ignites, but does not burn.
B
Gas is over.
B Cylinder valve or natural gas valve is closed.
B
In case of houses with natural gas supply, if there is gas leakage detector, the leak may be
detected and gas cut off.
B
Injector is clogged.
Flame burns low.
B Cylinder is over.
B
Injector is clogged.
When the product heats and cools down, metallic sounds are heart.
B Metal parts expand when heated and cause sound. This is not a cause of failure.
If you cannot eliminate the problem although you performed the instructions given in this section,
call your service to get support. Never attempt to repair the product that does not operate.
Please note!
The following shall not be considered as defects of the Product
Gas cooktops
Changes in the structure of the coating of cast iron cooking grids, due to
improper care of the product
Changes in the structure of the coating of flame tamers and reflectors of
gas burners
Changes in flame color when using the product, which is related to the
quality of incoming gas
Whistling and other inappropriate sounds related to the pressure of gas
incoming from the gas distribution line
Discoloration of desktop surface at the base of the burner