Monsher MGG 30, User Manual, Page: 29 / 68

English
29
The range is equipped with a seal to prevent the liquids through the cavities into the cabinet. In order
to place this seal, adhere the seal as shown in the figures above. Turn the range upside down and remove
the protective tape of the rubber seal and adhere it to the range; both ends of the seal should meet each
other. Install the mounting sheets as shown in figure 5 by help of screw. And place the range in the opening
on the counter.
Figure 7 shows the size to which the counter will be cut for installation of the range. Place the prepared
range into the counter cut to these sizes. If you will use the range on the built-in oven, observe the figures
8 and 9 for proper air circulation between the oven and range.
Figure 8
Figure 9
Start to use after you remove the protective film on Inox surface.