Monsher METZ 60 Noir, User Manual

Page: 18 / 40

English
18
2. Pulling down a bit, remove the filter.
In order to put the filters in place after cleaning, follow the above instructions in reverse
order.
Carbon filter (used in recirculated air mode)
Carbon filter is designed to trap odors and fumes while cooking. It is used in cases where
there is no possibility to connect the air cleaner to a special ventilation duct for discharging air
outward. When operating the appliance with a carbon filter, contaminated air is sucked into the
appliance and passes through a carbon filter, and then clean air is supplied to the kitchen.
The carbon filter should be replaced at regular intervals. The interval of filter replacement
depends on the frequency of use of the air cleaner, style of cooking and frequency of the aluminum
filter cleaning. Generally, it is recommended to replace the carbon filter once every 4 months.
How to remove carbon filter:
1. Remove aluminum filters.
2. Turn the carbon filter to the left and pull it.
3. Replace the old carbon filter with the new one.
4. Put the filter back into place.
If necessary, clean the outside of the air cleaner with a soft, damp cloth. Do not use
any abrasive cleaning agents. For painted stainless steel surfaces: to avoid scratching it is
recommended to wipe them with a soft, damp cloth in the painting direction. Do not remove the
lamp cover during the surface cleaning process.
Caution! Do not use the steam generators for cleaning.
Caution! Not following the above rules for cleaning the appliance and replacing filters may
cause fire.
Caution! If you need to transport the air cleaner, first of all, disconnect it from the power
supply and proceed with disassembly. It is recommended that you transport it in the original
packaging. If this packaging is not available, package the appliance using materials that
prevent possible damage resulting from transportation.