12
Digital Coaxial
Perform the following steps to connect the soundbar using the digital coaxial input.
1.
Using a digital coaxial audio cable (not
included), plug one end into the COAXIAL
input on the soundbar, then plug the other end
into the digital coaxial output on your audio
source device (TV, AV receiver, etc.).
AUX
This soundbar includes both 3.5mm to 3.5mm and RCA to 3.5mm analog audio cables.
Perform the following steps to connect the soundbar using the AUX input.
1.
Check your audio source device to determine if it
uses 3.5mm or RCA audio outputs.
2.
Using the appropriate cable, plug one end into the
AUX input on the soundbar, then plug the other
end into the appropriate (3.5mm or RCA) output
on your audio source device.
Power
Once all physical audio connections have been made, perform the following steps to
connect the soundbar to AC power.
1.
Ensure that the soundbar is physically
installed in its intended location near an
AC power outlet and that all desired
physical audio connections have been
made.
