Handling Precautions
1. Avoid opening or closing the aterproof ase near water. When you are installing
the camera or changing the memory card or the batter pack, choose a place with
low humidity well away from salty sea air.
2. Use only the supplied silicone grease. Use of other waterproofing products may impair
the strength of the aterproof ase. If any other waterproofing product is mistakenly
applied, wipe it off immediately.
3. Before going into or getting out of the water, handle the aterproof ase carefully in
order to prevent damage or loss.
4. Avoid using the aterproof ase for long periods of time in hot temperatures
interior will become hot, which can damage the camera. When using the cas
days, do not leave the waterproof case in direct sunlight. Also, turn off the camera regularly.
5. Remove sand and debris from the spaces surrounding the buttons and zoom lever by
rinsing them with water. Do not use the buttons or zoom lever while sand or debris is
.
6. Battery life is reduced in cold temperatures. When you use the waterproof case in very
cold places, keep it warm by putting it in a bag whenever you are not shooting. It is not
advisable to use
waterproof case in temperatures below the freezing point.
4