Preparing The Waterproof Case
Before securing the camera in the waterproof case, check over the waterproof case to make
sure there are no problems
.
1.
Check the waterproof case
Make sure the exterior is not damaged and the lens window is not dirty
.
If
it is dirty, gently wipe it with a soft
and
dry cloth
.
2.
Remove the waterproof seal from the mounting groove
Before the first use and after
each
successive use,
perform
a
rolling motion with your fingertip to remove
the seal. Do not dig
your fingernails into it or use pointed
or metallic objects to remove it
.
3
.
Check the waterproof seal and mounting groove
*
Make sure there is no debris (e.g. hair, sand or dirt) attached to the seal or in the
mounting groove.
*
To remove debris from the seal
,
put about a droplet of grease on your index finger,
hold the seal between your index finger and thumb, and slide your fingers around
the seal
.
9
*
Make sure the seal is not cracked or damaged
.
If the seal is damaged
, replace it.
